3D Printing Webinar and Event Roundup: March 24, 2024 – 3DPrint.com

We’ve acquired a really busy week of webinars and occasions, beginning with International Industrie Paris and a members-only roundtable for AM Coalition. Stratasys will proceed its superior in-person coaching and can also be providing one other webinar, Quickparts is holding a Glad Hour Roadshow and 3D Techniques is holding an open home in Ohio, 3DPrint.com and HP could have a joint webinar about Foxconn scaling its manufacturing with MJF, and rather more. Learn on for all the main points!

3D Printing Information Unpeeled

Our Govt Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), provides a information livestream one to 2 occasions per week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Stay and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing business that week, and why they’re essential. Among the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few are usually not, however they’re all equally attention-grabbing and impactful!

March 25 – 28: International Industrie Paris

This week in France, International Industrie Paris might be held from March 25-28, with 40,000 guests anticipated to attend this “assembly place for the entire industrial ecosystem.” 3,000 machines are anticipated to be working on the present flooring, with an anticipated 2,300 exhibitors, together with Materialise, Quickparts, ABB, 3D Industries, and Dassault Systèmes. There are 15 zones of exhibition house, beginning with additive manufacturing and 3D printing, in addition to machining and materials removing, robotics, electronics, and extra.

“As a cornerstone in reindustrialization, International Industrie symbolizes the dedication and satisfaction of commercial gamers. A Showcase for Areas, know-how and the important presence of business in our on a regular basis lives, it’s above all a spot to fulfill and do enterprise for many who are shaping as we speak’s and tomorrow’s business, and a chance to point out their preventing spirit.”

You may register for the occasion right here.

March 25: AM Coalition Members-Solely Roundtable

Tomorrow, March twenty fifth, the AM Coalition will maintain a digital members-only roundtable at 3 pm EST about “Speed up the Procurement and Fielding of Modern Applied sciences (APFIT).” This pilot was established by the Nationwide Protection Authorization Act of FY22 by the Workplace of the Beneath Secretary of Protection for Analysis and Engineering (OUSD(R&E)) as a aggressive, merit-based program for modern merchandise and applied sciences that meet the calls for of the warfighter, however don’t have the funding wanted to transition into manufacturing. It’s not an SBIR program, as a result of it’s procurement funding versus analysis funding. On the roundtable, attendees will hear from key frontline Division of Protection workers who’re instantly related to the procurement and acquisition course of all concerning the APFIT program.

“The aim of the APFIT pilot program is to expeditiously transition applied sciences into manufacturing, and to speed up the fielding of wanted applied sciences to the warfighter, with precedence given to applied sciences developed by small companies and nontraditional protection contractors.”

You may RSVP for the members-only roundtable right here.

March 26 – 28: Stratasys Continues Superior Coaching

This week, Stratasys continues its superior coaching programs within the U.S. and EMEA, and is holding “Stereolithography Superior Operations” at its Eden Prairie, Minnesota facility from March 26-28. This course is for many who wish to acquire extra data concerning the firm’s complete SLA workflow on the Neo 3D printer household.

“Learners might be launched to matters comparable to supplies consideration, working in Materialise Magics software program, printing operations, greatest practices and components ending methods.”

For extra particulars and registration: [email protected].

March 26: Engitype Open Home

3D printing provider Engitype is holding an open home at its facility in Gig Harbor, Washington this Tuesday, March twenty sixth, the place attendees can discover what’s new in additive manufacturing options from Markforged, Axtra 3D, 3D Techniques, and Formlabs. There are 5 one-hour time slots in the course of the day, beginning at 9 am and ending at 4 pm PST, and attendees can select one for his or her tour. Then they’ll have the possibility to see the brand new FX10 from Markforged, witness how Hybrid-Photosynthesis know-how from Axtra 3D revolutionized resin printing, find out how Formlabs made post-processing less complicated, and extra.

“Discover new materials choices catering to a various vary of functions, together with true silicon, injection molding, aerospace and automotive, medical/dental, electronics, manufacturing tooling functions, and extra.”

You may choose your time slot for the open home right here.

March 26: Navigating the True Prices of Metallic AM with AddUp

AddUp is holding a webinar at 11 am EST this Tuesday the twenty sixth, known as “Throughput Unlocked: Navigating Metallic AM’s True Prices.” Attendees will study all about evaluating the excellent price panorama of AM, and all the prices all through the whole manufacturing lifecycle, together with these related to construct preparation, 3D printing, post-processing, and high quality testing. The webinar will even give attention to essential questions for benchmarking steel AM platforms, in addition to the importance of throughput, uptime, batch sizes, and operational prices per construct—all of which add as much as the whole price of 3D printer possession.

“On this webinar, AddUp’s Enterprise Improvement Consultant, Jamie Sordo, demystifies the true price of AM. She makes use of a holistic method to have a look at the massive image and reply the questions that companies really want to know when evaluating AM as an answer.”

You may register for the webinar right here.

March 26: Superior Manufacturing & Operations Workshop

Additionally on the twenty sixth, on the Oshkosh Waterfront Lodge and Conference Heart in Wisconsin, GSC, An Ellison Applied sciences Firm, is holding a workshop about “Superior Manufacturing & Operations” from 11 am till 2 pm CDT. DELMIA, powered by the 3DEXPERIENCE Cloud platform, supplies options to producers and repair suppliers to assist leverage digital modeling and simulation with actual world operations to enhance high quality and effectivity. However, Markforged 3D printers may also help with this by producing parts with superior strength-to-wait ratios, optimizing half constructions for performance and efficiency, cut back bills related to outsourcing, and extra. Doug Piazza, Territory Supervisor at Markforged, will focus on the AM panorama, and its ever-expanding position on the manufacturing facility flooring.

“DELMIA Collaborative Operations allows Lean Manufacturing to remove waste (time, supplies, effort and cash).

“Markforged 3D Printers can considerably contribute to manufacturing facility optimization by enhancing total effectivity and competitiveness available in the market.”

You may register for the workshop right here.

March 26: Foxconn Scaling Manufacturing with HP’s Multi Jet Fusion

Tuesday, March twenty sixth is a busy day for occasions and webinars, however you’ll undoubtedly wish to make room in your schedule for this 3DPrint.com webinar at 2 pm EST! “Scaling Manufacturing with HP Multi Jet Fusion” isn’t your typical webinar—it’s a reside Q&A dialogue, moderated by our personal Joris Peels, between Joshua Almeter, AM engineer for eCMMS, Foxconn at HP’s Americas Product Completion Heart, and Dustin Kloempken, HP Lead Software Engineer. HP beforehand held three different webinars associated to utilizing its MJF options and DfAM to scale manufacturing, and in the event you nonetheless have questions on them, together with what’s subsequent in Foxconn’s journey with MJF, you will get them answered right here.

“Foxconn adopted, expanded, and scaled their manufacturing line utilizing additive manufacturing. They found real-world examples and advantages on their very own and by observing classes realized in different sectors outdoors their very own.”

You may register for this webinar, and discover hyperlinks to the earlier three, right here.

March 26: Quickparts Glad Hour Roadshow

The ultimate providing on the twenty sixth is a Glad Hour Roadshow by Quickparts, from 4-7 pm EST at Lynwood Brewing Concern in Raleigh, North Carolina. Highlights of this drop-in occasion embrace an introduction to Quickparts and its numerous, “limitless” manufacturing providers, together with 3D printing and CNC machining; case research; a know-how showcase with instance components on show; and drinks, appetizers, and networking.

“This free occasion is a superb alternative for engineers, designers, and different professionals to study extra about Quickparts’ in depth capabilities and the way they will leverage them to deliver their concepts to life. As a drop-in occasion, prospects can come when handy to them to speak with our consultants. Drinks and appetizers accessible to get pleasure from whereas exploring actual, customized components on show.”

Area is restricted, so register right here to order your spot!

March 27 – 28: Design-2-Half Atlanta

Design-2-Half, North America’s largest design and contract manufacturing commerce present is coming to Atlanta, Georgia from March 27-28. These exhibits are nice locations to search out new suppliers for components and manufacturing providers, and this one specifically will solely function 150 American suppliers to assist your online business shorten the availability chain, mitigate threat, and get components manufactured on time. 17 exhibitors are within the additive manufacturing service class, together with 3DOLOGiE, Endeavor 3D, GoEngineer, Phillips Corp., and TriMech. Different service classes embrace automation, bearings, 3D printed and funding castings, coatings, EDM, fasteners, warmth treating, machining, measurement and inspection, plastics, and rather more.

“From design and prototypes to manufacturing, ending and assemblies…get the moment solutions you want at this present.”

You may register for the present right here.

March 27: DPRTE 2024

The UK’s main protection procurement and provide chain occasion, DPRTE 2024, is coming to Farnborough, situated southwest of London, on March twenty seventh. Supported by the Ministry of Defence and the Procurement Recommendation and Help Service (PASS), DPRTE stands for “Defence Procurement Analysis Know-how Exportability,” and connects academia, patrons, suppliers, and prime contractors from throughout the protection acquisition provide chain. There might be a number of keynote shows, six data switch zones (together with Digital & Know-how), a product showcase, and three Companion Pavilions: Gear and Provides, Infrastructure and Estates, and Science and Know-how.

“DPRTE supplies patrons engaged throughout the defence procurement group with a useful alternative to fulfill with main suppliers, who’re actively delivering a various vary of modern services and products that may assist each present and future procurement necessities.”

You may register for the occasion right here.

March 27: 3D Techniques Columbus, Ohio Open Home

This Wednesday, March twenty seventh, 3D Techniques is holding an Open Home in Columbus, Ohio from 1-4 pm EST. That is the most recent cease on its Additive Insights Roadshow, and is held in partnership with BES-3D. Attendees could have unique entry to the corporate’s consultants, together with product specialists and engineers, who will present demonstrations, reply questions, and provide insights into how 3D Techniques’ varied materials, software program, and 3D printer options can tackle your particular functions and challenges, and empower companies to design, iterate, and manufacture with improved precision, velocity, and effectivity.

“Don’t miss this chance to develop your community, collaborate, and study from friends who share a ardour for innovation and additive manufacturing. Have a drink and chew with us and allow us to focus on how we may also help you unlock your AM potential.”

You may register for the open home right here.

March 27: Digital America Makes Member City Corridor

America Makes will maintain a digital city corridor assembly for its members from 2-3 pm EST on the twenty seventh. The format of this city corridor might be an open discussion board Q&A, so America Makes can hear instantly from its members. The speaker might be Zane Ross, Engagement Supervisor for America Makes / NCDMM.

“Convey your questions and ideas for the America Makes workforce.  The format will present a setting for open dialogue.”

You may register for the digital city corridor right here.

March 27: Revolutionizing Molding & Core Gear with AM

In its second providing of the day, 3D Techniques can also be holding a webinar at 2 pm EST on Wednesday the twenty seventh, about “Revolutionizing Molding and Core Gear: Unlocking Effectivity with Additive Manufacturing.” Sponsored by Trendy Casting (American Foundry Affiliation), the webinar will shine a highlight on the corporate’s pellet 3D printers and supplies, as attendees discover how AM can remodel the foundry panorama. Actual-life use circumstances of foundries utilizing pellet extrusion methods to cut back time to market and enhance competitiveness might be highlighted, and matters will embrace system and materials choice, essential components like lead time and bench properties, and extra.

“In as we speak’s foundry business, challenges abound within the manufacture and procurement of molding and core gear, characterised by lengthy lead occasions for supplies, rising provide prices, and a shortage of expert labor. Nonetheless, a confirmed resolution exists to surmount these obstacles – pellet extrusion additive manufacturing, particularly 3D Techniques’ EXT Titan Pellet sequence 3D Printers. This cutting-edge know-how facilitates the speedy manufacturing of patterns and core containers, presenting a paradigm shift in each time and value effectivity in comparison with conventional strategies.”

You may register for the webinar right here.

March 28: GrabCAD Print Professional & PolyJet 3D Printing

Along with its SLA superior coaching, Stratasys can also be holding a webinar about “Pushing the Boundaries of 3D Printing with GrabCAD Print Professional x PolyJet” at 10 am EST on Thursday, March twenty eighth. Product Supervisor Rotem Zax will converse in the course of the webinar, discussing the varied intricacies of useful, form-fit, and visible prototyping with GrabCAD Print Professional software program and PolyJet 3D printing.

“We’ll discover the game-changing options which are setting new business requirements, together with the modern Good Insert. Uncover how the Print-on-Tray operate permits for printing instantly on the tray, providing a novel alternative for adopting floor textures. We will even focus on the groundbreaking Air-as-Materials function that simplifies workflow whereas offering as much as 30% materials financial savings.”

You may register for the webinar right here.

March 28: TRX Webinar on CBAM Supplies & Course of

Additionally on Thursday the twenty eighth, at 11 am EST, America Makes will maintain the most recent in its TRX Webinar Collection, “Composite Primarily based Additive Manufacturing (CBAM) Materials and Course of Overview.” Jeff DeGrange, Chief Business Officer at Unattainable Objects, Inc., will present an summary of the engineering ideas of the corporate’s 3D Composite Primarily based Additive Manufacturing (CBAM) supplies and processes for producing thermoplastic components at excessive charges of velocity.

“This webinar features a deep dive into the CBAM course of and workflow, half design pointers, materials construct choices, materials properties, present tooling and end-use composite functions, and a glance into future developments for utilizing ceramic supplies in excessive temperature environments.”

You may register for the webinar right here.

March 28: MakerBot’s Annual Schooling Summit

Lastly, MakerBot is holding its fourth annual Schooling Summit, beginning at 12 pm EST on the twenty eighth. The theme might be “From classroom to profession: 3D Printing in Schooling and Past,” and educators will share their views and recommendations on utilizing the know-how with college students, and the influence it has within the classroom. College students will even share how 3D printing modified their studying experiences. There might be 4 hourlong periods: setting the inspiration; empowering educators; paving the way in which; and academia and business. Each is curated to supply takeaways that may actually influence as we speak’s classroom.

“Be a part of us as we create an area for collaboration, studying, and constructing a group devoted to shaping the tutorial panorama and getting ready college students for careers that transcend creativeness.”

You may reserve your seat for the summit right here.

Do you have got information to share about any future webinars or digital and reside occasions? Please tell us!